Setting Printer Parameters: Phaserlink Software Pages; Information Forwarding - Tektronix Phaser 740 Setup Manual

Setting printer parameters: PhaserLink software pages

Information Forwarding

If there are read-write parameters on the page, there is a field at the bottom of
the page for a validation password. By default, the password is a NULL string
(no characters). The password is common across all PhaserLink software pages.
N
O T E
PhaserLink passwords are not encrypted.
If you enter an invalid password, the printer reports an error. The
Validation Password link displays the Set Administrator Password
page, which you can use to change the password.
Click Restore Initial Form Values to restore all values on the page to
their previous settings.
To transmit changes to the printer, click Do/Apply.
When you click a link that connects you to the Tektronix web server, the
Information Forwarding feature causes the printer to send the following printer
status information back to the Tektronix server:
Printer model
Firmware version
Printer ID number
Page count
Language
Serial Number
Transmitting this information back to the Tektronix server ensures the quickest
connection to relevant product and update information. Tektronix may store
this information to serve you better in the future.
PhaserLink Software: the Printer's Information Link
9
71
Setup Guide