Tektronix Phaser 740 Setup Manual page 20

2
Connecting Your Printer to a Network
14
PhaserShare Networking
5.
Select the desired Frame Routing: Transparent or Source Route:
a.
Press until the Frame Routing choice you want is displayed.
b.
Press Select to enter your choice into the printer; the front panel
briefly displays Selected, then displays the selected Frame
Routing choice again.
6.
Return the printer to normal operation:
a.
Press until the front panel displays:
Network Settings
Token Ring
b.
Press again.
If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
Confirm, the printer resets. To return to normal operation without
resetting the printer, press
top line of the display. Press
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
If you have not changed any parameters that require a printer
reset, press
Menu
; Printer Menu appears on the
again; the printer returns to
again; the front panel displays Ready.