Tektronix Phaser 740 Setup Manual page 33

Verify information and finish the configuration
After you have entered the configuration information, the Quick Configuration
Wizard displays the Configured Printer Information dialog box, which reports
the information you have entered.
1.
Verify that the information is correct.
If the information is correct, click Apply Changes.
If the information is not correct, click Back to return to previous
dialog boxes and correct the information. Click Next to return to
the Configured Printer Information dialog box. Click Apply
Changes.
To exit the wizard and return to the Main window without making
any changes, click Cancel.
2.
After you click Apply Changes, the printer resets; the changes take
effect when the reset is complete.
For more information on NetWare configuration and troubleshooting, see the
PhaserShare Networking Manual on your printer's CD-ROM.
Novell NetWare Configuration
Setup Guide
4
27