Ethertalk, Localtalk, And Tokentalk Configuration; Configuration Overview - Tektronix Phaser 740 Setup Manual

Chapter
3
Configuration overview
EtherTalk, LocalTalk,
and TokenTalk
Configuration
N
O T E
The printer's AppleTalk connection works with Macintosh system software 7.0,
7.1, 7.5, 7.6, 8.0, 8.1, and 8.2.
The configuration procedure for LocalTalk, EtherTalk, and TokenTalk consists of
two simple steps:
1.
Print the Configuration Page. It reports the printer's default name,
which you need for EtherTalk and TokenTalk configurations. For
information on printing a Configuration Page, see "Printing a
Configuration Page" on page 2.
2.
Verify that the printer is in the Chooser. See "Finding the printer's
name in the Chooser" on page 22.
If the printer is not in the Chooser, see the PhaserShare Networking
Manual on the printer's CD-ROM.
If the printer is in the Chooser, you may want to change the
printer's name or zone. For information on these procedures, see
the PhaserShare Networking Manual on the printer's CD-ROM.
21
Setup Guide