Tektronix Phaser 740 Setup Manual page 36

4
Novell NetWare Configuration
30
PhaserShare Networking
3.
Enable or disable the frame type:
a.
Press until the frame type you want is displayed.
b.
Press Menu to display the current status of the frame type: On or Off.
c.
Press until the frame type is either On or Off, as desired.
d. Press Select to enter your choice into the printer. The front panel
briefly displays Selected, then returns to the display of the frame
type name.
e.
Press to return to the menu of frame types.
4.
You can set more than one frame type; to set other frame types, repeat
Step 3.
5.
Return the printer to normal operation:
a.
Press until
display.
b.
Press again.
If you have changed any parameters that require a printer reset to
take effect, you will be prompted to reset the printer. If you press
Confirm, the printer resets. To return to normal operation without
resetting the printer, press
top line of the display. Press
normal operation, but the changes you have made will not take
effect until the next time the printer is reset.
If you have not changed any parameters that require a printer
reset, press
appears on the top line of the
Network Settings
; Printer Menu appears on the
again; the printer returns to
again; the front panel displays Ready.