Tektronix Phaser 740 Setup Manual page 51

2.
In the Add LPR compatible printer dialog box, enter the printer's IP
address in the box labeled Name or address of server providing lpd.
In the box marked Name of printer or print queue on that server, enter
PS in uppercase. Click OK.
3.
When returned to the Printer Ports box, click Close.
4.
At the Add Printer Wizard dialog box, click the box next to this new
port; a check mark is added. Click Next.
Creating an AppleTalk port
1.
In the Printer Port dialog box, double-click AppleTalk Printing
Devices.
2.
In the Available AppleTalk Printing Devices dialog box, select the
zone where the printer resides. If no zone name appears, double-click
the zone icon.
3.
Windows NT searches for all AppleTalk devices in that zone and
displays a list; double-click your printer.
4.
Windows NT prompts you to capture the printer; click No. (Capturing
the printer causes it to disappear from the Chooser.)
5. After adding the printer port, click the box next to the new port to
select it; click Next.
Install the driver
1.
In the Add Printer Wizard dialog box, click Have Disk to add a new
Tektronix driver.
2.
Type the path name to the driver files. This can be A:\ if the files are
on a diskette. If these files were downloaded from an on-line service,
type the path name where they were saved. Click OK.
3. Select the printer model and click Next.
4. If prompted that a driver is already installed for this printer, select
Replace existing driver. Click Next.
7
Windows NT
45
Setup Guide