Tektronix Phaser 740 Setup Manual page 63

7.
To set the gateway address:
a.
Press until Gateway Address is displayed.
b.
Press Menu; the front panel displays the gateway address.
c.
Use and
gateway address.
d.
When the gateway address is set, use Set and Confirm as
described in Steps 4g and 4h to enter the gateway address into the
printer.
e. ; the front panel displays:
Press
TCP/IP
Gateway Address
8.
The printer calculates the broadcast address based on the IP address
and the network mask. However, the broadcast address can be viewed
and set using the following procedure:
a.
Press until Broadcast Address is displayed.
b.
Press Menu; the front panel displays the broadcast address.
c.
Use and
broadcast address.
d.
When the broadcast address is set, use Select and Confirm as
described in Steps 4g and 4h to enter the broadcast address into the
printer.
e.
Press ; the front panel displays:
TCP/IP
Broadcast Address
Setting the Printer's IP Addressing Parameters
as described in Steps 4d through 4f to set the
Menu
as described in Steps 4d through 4f to set the
Menu
8
57
Setup Guide