Removing An Input Assignment; Adding Or Removing A Gpi Output Key Assignment; Service Menu, Matrix Out - RTS EKP-632 User Manual

Removing an Input Assignment

Select , then tap PGM.
1
GPIO
Press ↓↓ or −− if necessary to select
2
Tap PGM.
3
Press ↓↓ or −− .to display the GPI input that you want to remove.
4
Tap PGM.
5
Press ↓↓ to select
6
Tap PGM.
7
→
displays. The arrow indicates that "Not Assigned" is the new selection.
8
Not Asgnd
Tap CLR to exit.
9
Run Service Menu, Save Cfg, to store local GPIO settings.
10

Adding or Removing a GPI Output Key Assignment

Select , then tap PGM.
1
Local GPIO
displays.
2
Input
Press ↓↓ to display
3
Tap PGM.
4
5 displays.
GPI Out #1
Press ↓↓ or −− to display a different GPI output.
6
Tap PGM to select a GPI output.
7
displays. Also, if there is a key currently assigned to activate the selected GPI output,
8
Tap Key
both LEDs for that key will be lit red. If there is no assignment, no LEDs will be lit red.
Tap an intercom key to add or remove the GPI output assignment.
9
Tap CLR to exit, or BACK to back up and make more assignments.
10
11 Run Service Menu, Save Cfg, to store local GPIO settings.

Service Menu, Matrix Out

This menu item allows the user to select between Normal or Hot Mic. In the Normal (defualt)
setting audio from the Mic goes out to the Matrix when the talk key is latched. In the Hot Mic
setting audio from the Mic goes out to the Matrix with out regard to the talk key's state.
Select Matrix Out from the Service Menu, then tap PGM.
1
→
displays
2
Normal
Press ↓↓ to select either
3
Tap PGM
4
5 Tap CLR to exit
Run Service Menu, Save Cfg, to store Matrix Out settings.
6
Input
.
Not Asgnd
.
Output
or
Normal Hot Mic
.
6-15