• The same setup page cannot be assigned in more than one place. If a setup page is already
Notes
assigned somewhere else, you must clear or change that assignment first. With the exception of
the main row assignment, you can clear any page assignment from a row of keys by entering
E-PNL 0 PGM, then pressing any key in the row.
• If you cannot change the setup page assignments for a particular keypanel, this feature may be
restricted in ADAMedit (Keypanels / Ports screen, Edit button, Setup tab, Setup Page Options).
• To display setup page assignments at any time, see "Display Setup Page Assignments".
KEYPAD PROGRAMMING, ASSIGNING INTERCOM KEYS
General
There are three methods to assign intercom keys with keypad programming. These methods are
summarized below and explained on the following pages.
• Key Assignment using Keypad Numeric Entry: Using this method, you enter the panel
number, party line number etc. that you wish to assign to a key. This method requires that you
know the number (not the name) of the port, party line etc. that you wish to assign. Since most
users do not have access to this information, this method of key assignment is not
recommended.
• Key Assignment by Copying an Assignment: Using this method, you can copy an assignment
from one key to another. You can also use this method to transfer an incoming call to a talk key
and/or listen key.
• Key Assignment using Alpha Scrolling: Using this method, you scroll through lists of alpha
names in the Call waiting window and select the name of the panel, party line etc. that you
want to assign. Then you copy that name to a key. If descriptive names have been assigned
(using the intercom system configuration software) alpha scrolling is easiest to use.
Assigning Keys Using Keypad Numeric Entry
Each programming step must be completed within 4-5 seconds. Otherwise, the programming
Note
sequence will automatically quit.
General Procedure
For talk level 2 assignment only: Tap 0
1
Select the key assignment type:
2
NUM Intercom port.
PL Party line.
AUTO Auto function.
FUNC SLIST Special list.
FUNC IFB IFB
FUNC ISO Camera ISO
FUNC RELAY Relay or GPI output.
3 Auto function assignment only: Tap an additional number to select the desired auto function:
1 Auto listen (listen keys only)
2 Auto follow (listen keys only)
5-4
K P - 6 3 2 U s e r M a n u a l
0 . Otherwise, skip this step.