Key Assign Menu, Setup Page; Key Option Menu; Key Option Menu, Auto Dial; Key Option Menu, Chime - RTS EKP-632 User Manual

Key Assign Menu, Setup Page

Use this menu item to change the setup page assignments on the KP-632 or EKP-632. One setup
page is used for the top row of keys, and another setup page is used for the bottom row.
Press FWD or PGM to select
1
2
Page 1
Press ↓↓ o r −− to select any of the following:
3
Page 1
Page 2
Page 3
Page 4
Clear Page
4 Tap PGM.
5
Tap Key
assignments for that page should appear in the displays.
6 You can press ↓↓ o r −− to select and assign another setup page. Or, tap CLR to exit.
You do not need to run Save Cfg to store changes to setup pages. These are stored in the intercom
Note
system.

KEY OPTION MENU

Key Option Menu, Auto Dial

Use this menu item to store auto dial numbers.
Select
1
2
Phone#?
Begin tapping number keys. The numbers will scroll in the Call waiting window.
3
To insert a pause at any time, tap CLR 9
Note
dialing 9 to get an outside line.
4 Tap FWD. (Do not tap PGM!)
5
A-Dial #1
or − − to select the desired auto dial number.
6 Tap PGM.
7
#XX saved
8 Run Service Menu, Save Cfg, to store auto dial numbers.

Key Option Menu, Chime

You can add a chime tone to any key for incoming call announcement. The chime tone will
activate for about 5 seconds after a call is received.
Select
1
displays.
: Assign setup page 1 to the KP-632 or EKP-632.
: Assign setup page 2 to the KP-632 or EKP-632.
: Assign setup page 3 to the KP-632 or EKP-632.
: Assign setup page 4 to the KP-632 or EKP-632.
: Clear a page assignment from the KP-632 or EKP-632.
displays. Tap any key in the row where you want to assign the setup page. The key
, then tap PGM.
Auto Dial
displays.
displays (store auto dial number 1). To store a different auto dial number, press ↓↓
displays (where XX = the auto dial number you selected).
, then tap PGM.
Chime
in the Key Assign menu.
Setup Page
9 . For example, you may have to insert a pause after
6-7