Menu System, Key Assign Menu; General Procedure To Use The Key Assign Menu - RTS EKP-632 User Manual

MENU SYSTEM, KEY ASSIGN MENU

Use this menu to assign intercom keys, to adjust listen levels for point-to-point keys and party line
keys, and to assign setup pages.

General Procedure to use the Key Assign Menu

Clear the Call waiting window if necessary, by tapping upward one or more time on the Call
1
waiting key.
Tap Menu
2
Tap ↓↓ to scroll down to the
3
Tap PGM or FWD to enter the menu.
4
If you do not have a trunking intercom system, skip to step 6.
Note
5 Remote key assignment only (trunking systems only): If your intercom system is configured
for trunking,
matrix before assigning intercom keys to destinations in that matrix. You do not need to select
an intercom matrix if you are assigning keys in your own intercom system. Also, do not select
an intercom matrix if you are assigning auto functions or setup pages, or if you are changing
listen gains for remote point-to-point keys or remote party line keys. Select a matrix as follows:
Press FWD or PGM to access the Matrix list.
1
Press ¯¯ o r -- , to locate the desired matrix.
2
Press FWD or PGM to select a matrix. Wait may display while the scroll lists for that matrix
3
are loading.
6
Pt-to-Pt
assignment). This is the list of available point-to-point key assignments. Press ↓↓ or −− to
select a different list as follows:
Pt-to-Pt
Party Line
: Assign a key to talk/listen to an IFB.
IFB
Spcl List
Sys Relay
Camera ISO
UPL Resrc
Auto Func
procedure and go to "Key Assign Menu, Auto Func".)
Key Gain
assignment. (If you select this item, skip the rest of this procedure and go to "Key Assign Menu,
Key Gain".)
Reset Vols
assignment. (If you select this item, skip the rest of this procedure and go to "Key Assign Menu,
Reset Vols".)
Setup Page
procedure and go to "Key Assign Menu, Setup Page".)
7 Tap PGM or FWD to select a list. In some cases
uploaded from the intercom system.
Key Assign
displays in the Call waiting window. You must select a remote intercom
Matrix
should now display in the Call waiting window (both for local and remote key
: Assign a key to talk/listen to another intercom port.
: Assign a key to talk/listen to a party line.
: Assign a key to talk/listen to a special list.
: Assign a key to activate a relay or GPI output.
: Assign a key to talk/listen to an ISO.
: Assign a key to activate a UPL resource.
: Assign an auto function to a key. (If you select this item, skip the rest of this
: Adjust the listen gain for a key that already has a point-to-point or party line
: Restore the default listen level for keys that have a point-to-point or party line
: Change the setup page assignments. (If you select this item, skip the rest of this
menu.
may display while the requested list is
Wait
6-3