Table of Contents
Advertisement
KP9X Dial Sequence
Activate the TIF listen key (listen LED green).
1
Make sure the TIF talk key is off (Talk LED off).
2
On the keypad, tap CLR-PHONE-PGM.
3
Activate the TIF talk key (talk LED turns green). The "ON" LED at the TIF-951 / TIF-2000
4
will activate, and you should hear dial tone at the KP-632.
Dial the telephone number. Digits scroll in the display above the TIF talk key.
5
When the far end answers, you can dial additional digits (to access a mail system or automated
6
response system, etc.). When finished dialing, momentarily turn off the TIF talk key to end
dialing mode (talk LED turns red).
Turn the TIF talk key back on for conversation.
7
KP9X Redial Sequence
Tap the PHONE key to activate dialing mode.
1
Tap "up" on the TIF key to activate listen.
2
Tap CLR 0
3
After the number has dialed, click the PHONE key to end dialing mode.
4
5
If the far end answers, tap "down" on the TIF key to activate talk.
Use the KP9X hang-up sequence to hang up.
6
KP9X Autodial Sequences
Storing an Autodial Number in the TIF-951 / TIF-2000
Tap the PHONE key.
1
Tap the TIF talk key to latch it on.
2
Using the number keys on the keypad, dial the phone number that you want to store. The entire
3
phone number sequence can have up to 30 digits.
To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9
Note
pause.
4 After dialing the telephone number, click CLR PGM, then enter a two-digit number (01, 02,
etc. up to 32) that you will use as the autodial number.
5 After storing the autodial number, hang up using the KP9X hang-up sequence.
Dialing an Autodial Number Stored in the TIF-951 / TIF-2000
Tap the PHONE key to activate dialing mode.
1
2
Tap "down" on the TIF talk key to latch it in the on position.
Tap CLR followed by the autodial number (01, 02, etc.).
3
When finished dialing, click the PHONE key again to exit dialing mode.
4
Hang up using theKP9X hang-up sequence.
5
0 . The last phone number will redial.
9 for each
8-3
Advertisement
Chapters
Table of Contents
