Address Setting For Zeus; Address Setting For Adam Cs; Adam Cs With Rj12 Or Db-9 Back Panel - RTS EKP-632 User Manual

Address Setting for Zeus

Intercom port connectors on the Zeus back panel are arranged in three groups of eight intercom
ports. For each group, intercom port connectors are labeled ID 1, ID 2, etc. When you connect a
KP-632 keypanel to Zeus, set the Address switch to match the corresponding ID number on the
Zeus back panel. Note that address switch settings 0, and 9 through F are not used.

Address Setting for ADAM CS

Each Audio I/O card contains 1 group of 8 intercom ports. However, the method of breaking out
the groups depends on the type of connectors on the back panel.

ADAM CS with RJ12 or DB-9 back panel:

The intercom port connectors are arranged in groups of 8. The first connector at the left for each
group is Address 1, the next is Address 2, and so forth.
Address switch settings 0, and 9 through F are not used.
Note
2-3