Key Assignments Using Keypad Numeric Entry; Kp9X Phone Operation; Kp9X Hang-Up Sequence - RTS EKP-632 User Manual

Tap PGM.
3
4 Tap any key in top row to assign page to top row. Tap any key in bottom row to assign page to
bottom row.

KEY ASSIGNMENTS USING KEYPAD NUMERIC ENTRY

For talk level 2 assignment only: Tap 0
1
Select the key assignment type:
2
NUM Intercom port.
PL Party line.
AUTO Auto function.
FUNC SLIST Special list.
FUNC IFB IFB
FUNC ISO Camera ISO
FUNC RELAY Relay or GPI output.
3 Auto function assignment only: Tap an additional number to select the desired auto function:
1 Auto listen
2 Auto follow
3 Auto mute
4 Auto reciprocal
5 All call
6 DIM (talk level 2 only, for point-to-point key)
7 Auto table (use only with IFB)
4 Trunked intercoms only: Select an intercom matrix (tap 1 , or 2 etc.).
5 Tap one or more number keys to select the desired port number, party line number, etc:
6 If the destination is in the local matrix, just enter the number.
7 If the destination is in a remote matrix, you must always enter at least 3 digits, so for example
to assign port 1 you must enter 0
8 Tap PGM.
9 Tap down on a key to assign talk. Tap up to assign listen.

KP9X PHONE OPERATION

KP9X Hang-up Sequence

Turn off the TIF talk key.
1
On the keypad, tap PHONE-CLR.
2
Turn the TIF talk key on, then off. The TIF key talk and listen indicators will turn off and the
3
TIF-951 / TIF-2000 "OFF" LED will activate.
8-2
K P - 6 3 2 U s e r M a n u a l
0 .
0 1 .