Key Assign Menu, Party Line; Key Assign Menu, Ifb; Key Assign Menu, Spcl List; Key Assign Menu, Sys Relay - RTS EKP-632 User Manual

Key Assign Menu, Party Line

Assigns a key that talks and/or listens to a party line. The key will have no effect until members
have been assigned to the party line in ADAMedit. Note that party lines members are usually non-
keypanel devices that cannot activate talk and listen paths. Therefore, if you want full
communication with the party line, you will need to assign both talk and listen on the key. If all
communications will normally be 2-way, you may wish to assign the key as Talk + auto listen.

Key Assign Menu, IFB

By default, all IFBs are restricted and you will see
To see IFBs you must check the appropriate Scroll Enable check boxes in ADAMedit.

Key Assign Menu, Spcl List

Assigns a key that talks and/or listens to a special list. The key will have no effect until members
have been assigned to the special list in ADAMedit. Note that some or all special list members
may be non-keypanel devices that cannot themselves activate talk and listen paths. Therefore, if
you want full communication with all members of the special list, you may need to assign both
talk and listen on the key.

Key Assign Menu, Sys Relay

Sys Relay refers to any of several types of control devices that can exist in the intercom system,
including:
• The 8 GPI outputs from an ADAM Frame (J11 on the XCP-ADAM-MC Breakout Panel).
• The 8 GPI outputs of an ADAM CS frame (J903 on the ADAM CS back panel).
• The relay outputs of an FR9528 Relay Frame (RELAY OUTPUTS connector on the FR9528
back panel).
• The 16 GPI outputs of a UIO-256 Universal Input/Output Frame (J5 on the UIO-256 back
panel).

Key Assign Menu, Camera ISO

By default, all ISOs are restricted and you will see
item. To see ISOs you must check the appropriate Scroll Enable check boxes in ADAMedit.

Key Assign Menu, UPL Resrc

By default, all UPL resources are restricted and you will see
select this item. To see UPL resources you must check the appropriate Scroll Enable check boxes
in ADAMedit. (In the ADAMedit System menu, select UPL Resources. Then enter check marks
in the appropriate Scroll Enable boxes.)

Key Assign Menu, Auto Func

Press FWD or PGM to select auto functions in the Key Assign menu. Then press ↓↓ o r −−
1
to locate the desired auto function as follows:
• AutoFollow (AF, for listen keys only)
• Auto Listn (AL, for listen keys only)
when you attempt to select this item.
Not Avail
when you attempt to select this
Not Avail
when you attempt to
Not Avail
6-5