Table of Contents
Advertisement
• AC: All-call key.
For descriptions of the various key assignment types, see the "GLOSSARY".
Note
Display Menu, Chans On
Displays an alpha list, in the Call waiting window, of all intercom ports that currently have talk
crosspoints closed to this keypanel. Chans On is typically used to locate an open mic or other
open audio source that needs to be shut off. The most likely cause is typically a talk key that has
been left on at some keypanel. In this case, use the ↓↓ and − − keys to scroll through the list
of names. You can then press the Call waiting key to ask the person at the other end to turn off
their talk key.
Display Menu, Key Groups
Use the ↓↓ or − − key to select Group 1, Group 2, etc. Then press FWD or PGM to display
the group. The talk and listen LEDs of the master key will be lit red and the talk and listen LEDs
for the slave keys will be lit green.
Display Menu, Key List
Displays and allows access to all the other assignments on the other keypanel pages that are not
currently showing in the keypanel display.
Display Menu, Level 2
Displays the talk level 2 assignments for all keys.
Display Menu, Listen
Displays the listen assignments for all keys.
Display Menu, Matrix
Displays the intercom system name for all talk level 1 key assignments. In non-trunked intercom
systems, the intercom system name is always LOCL (local). In trunked intercom systems,
intercom system names are created in CStrunk (Intercoms menu, Names.)
Display Menu, Panel ID
Panel ID displays the calculated port number that the keypanel is connected to. The calculation is
based on the data group that the keypanel is connected to, along with the Address switch setting
on the keypanel. If the Address switch is incorrectly set, the wrong Panel ID will display. Panel
ID also displays the port alpha in brackets if the port is not scroll restricted.
Display Menu, Version
Displays the firmware version of the keypanel.
For firmware upgrades, contact your intercom system dealer. The KP-632 firmware can be
Note
upgraded from ADAMedit. In ADAMedit Help, search for "firmware update".
6-2
K P - 6 3 2 U s e r M a n u a l
Advertisement
Chapters
Table of Contents
