Status, Gpi Input; Status, Gpi Output - RTS Cronus Manual
Digital intercom matrix
Hide thumbs
Also See for Cronus:
- User manual (107 pages) ,
- Release note (18 pages) ,
- Installation instructions (1 page)
Table of Contents
Advertisement
Cronus
Status, GPI Input
GPI Input displays the status of each GPI (General Purpose Input) assigned in the system. The GPI Input allows an external
piece of equipment to trigger the intercom. For example, using an on-air tally to dim or mute specific outputs. GPI Inputs are
created within AZedit.
NOTE:
The maximum number of devices that can be connected when using a GPIO-16 are as follows:
•
Zeus, Zeus II, and ADAM CS = 4 devices (64 relays)
•
ADAM and Cronus = 16 devices (256 relays)
For more information on the GPIO-16, see the GPIO User Manual (F.01U.193.288).
To display the GPI Input status, do the following:
Turn the ENC1 knob to scroll to Status.
1.
When Status is displayed, tap the ENC1 knob.
2.
AZedit displays.
Turn the ENC1 knob to scroll to GPI Input.
3.
Tap the ENC1 knob.
4.
1-64 displays.
Turn the ENC1 knob to scroll through the GPI Input assignments.
5.
Status, GPI Output
GPI Output displays the status of each GPI Output assigned in the system. GPI output is similar to the GPI Input, except
instead of triggering an action on the intercom, the intercom is programmed to perform a function as a result of an action on
the intercom. For example, when a port is connected to a 2-way radio, the radio is normally in receive mode. Use a GPI Output
to trigger the transmitter whenever anyone talks to the port.
NOTE:
The maximum number of devices that can be connected when using a GPIO-16 are as follows:
•
Zeus, Zeus II, and ADAM CS = 4 devices (64 relays)
•
ADAM and Cronus = 16 devices (256 relays)
For more information on the GPIO-16, see the GPIO User Manual (F.01U.193.288).
To display the GPI Output status, do the following:
Turn the ENC1 knob to scroll to Status.
1.
When Status is displayed, tap the ENC1 knob.
2.
AZedit displays.
Turn the ENC1 knob to scroll to GPI Output.
3.
Tap the ENC1 knob.
4.
1-64 displays.
Turn the ENC1 knob to scroll through the GPI Output assignments.
5.
Bosch Security Systems, Inc.
Technical Manual
Cronus Menu Structure 19
F.01U.118.890
Rev. 23
Advertisement
Table of Contents
