RTS EKP-632 User Manual page 93

NOTE: Once you have entered the Netmask, you may need to enter the Gateway IP Address. A
Gateway is a node (for example, a computer) on a network that serves as an entrance to another
network.
16. Tap the encoder knob.
The actual Gateway IP Address appears.
17. Enter the first number in the Gateway IP Address.
This activates the first octet of the Gateway IP Address and clears the rest of the address.
18. Tap the encoder knob.
This confirms the first octet in the Gateway IP Address and moves you to the second octet.
NOTE: Tap the encoder knob to skip over any octet that does not need modifications.
19. Repeat steps 19 and 20 until the entire Gateway is entered.
20. Tap the encoder knob.
21. Press and hold the encoder knob to exit the menu.
The changes are now enabled.
NOTE: You can still set the IP Address without being connected to an Ethernet LAN. Once
you have entered the IP information, you will be prompted to perform a Save Cfg. The ad-
dress is saved in the keypanel until the RVON-1 is connected to an Ethernet LAN.
TOP LEVEL MENU, RVON CONN.
Select an RVON Connection from the Top Level Menu
The RVON Conn. menu is a list of connection offers from other intercoms. This menu allows the
keypanel to dynamically select an intercom and port to which it will connect.
To select the connection offer, do the following:
1. On the KP-812, scroll to RVON Conn., then tap the encoder knob.
The currently selected connection offer appears in the CWW window. If you have not
previously selected the connection, you will see "none".
2. Scroll to the connection offer to which you want to connect, then tap the encoder knob.
The connection offer begins to flash indicating that it has been selected.
3. Press and hold the encoder knob to exit the menu.
The keypanel will now connect to the selected port
RVON-1 User Manual 15