Key Assign Menu, Key Gain; Key Assign Menu, Reset Vols - RTS EKP-632 User Manual

• Auto Mute (AM, for listen keys only)
• Auto Recip (AR, for listen keys only)
• All Call (AC, for talk level 1 only)
• Dim ( Dim Table function, for talk level 2 on point-to-point keys only)
Press FWD or PGM to select the desired auto function.
2
3
Tap Key
auto functions except All Call or DIM. Tap down for All Call or DIM.
• If the assignment is successful, the abbreviation for the auto function will appear in the
Notes
alphanumeric display for that key. However, if you try to assign an auto function to a key that
already has that auto function assigned, the assignment will be ignored. The assignment will
also be ignored if scroll enable for auto functions has been disabled in ADAMedit, or if the key
you are trying to assign has been restricted in ADAMedit.
• You can tap CLR to exit and return to normal operation, or tap BACK to return to the auto
function menu and make more assignments.
• Trunked intercom systems: Do not select a matrix before assigning auto functions. All auto
functions are assigned using the local matrix menus.
• You do not need to run Save Cfg to store auto function assignments. These are stored in the
intercom system.
• For descriptions of the auto functions, see "GLOSSARY".

Key Assign Menu, Key Gain

Use this menu item to adjust the listen gains for point-to-point or party line keys. The key that you
want to adjust must already have a point-to-point or party line listen assignment.
1 Press FWD or PGM to select
2
Tap Key
The current listen level displays in the Call waiting window.
3
Press ↓↓ o r −− to change the listen level.
4
You may tap additional point-to-point or party line keys to change their listen levels. Or, tap
5
CLR to quit.
You do not need to run Save Cfg to store key gain changes. These are stored in the intercom
Note
system.

Key Assign Menu, Reset Vols

Use this menu item to simultaneously reset gains for all point-to-point or party line keys.
Press FWD or PGM to select
1
2
Done
Tap CLR to quit.
3
You do not need to run Save Cfg after resetting key gains. These settings are stored in the
Note
intercom system.
6-6
K P - 6 3 2 U s e r M a n u a l
displays. Tap an intercom key to assign the selected auto function. Tap up to assign all
displays. Tap "up" on the key that you want to adjust.
displays. All key gains are now reset to the default level.
in the Key Assign menu.
Key Gain
in the Key Assign menu.
Reset Vols