Key Assign Menu, Matrix; Key Assign Menu, Pt-To-Pt - RTS EKP-632 User Manual

8 When the requested list is displayed, press ↓↓ or −− , to locate the desired assignment.
9 Tap PGM or FWD to select the assignment.
10
Talk Lvl 1
select a different option. Options are as follows:
• Talk Lvl 1: Assigns only talk level 1. Leaves the listen assignment as is.
• Listen: Assigns only listen. Leaves the talk assignment as is.
• Talk + AF: Assigns talk level 1, with auto-follow listen.
• Talk + AL: Assigns talk level 1, with auto-listen.
• Talk + AM: Assigns talk level 1, with auto-mute listen.
• Talk + AR: Assigns talk level 1, with auto-reciprocal listen.
• Talk Lvl 2: Assigns talk level 2.
If you attempt to assign talk level 2 to a key and there is no talk level 1 assignment, your
assignment will go on talk level 1.
11If you change the talk level 1 assignment for a key that also has a talk level 2 assignment, the
talk level 2 assignment will be erased.
12Tap PGM or FWD to select one of the previously listed items.
13
Tap Key
14Tap an available intercom key. Tap down for any kind of talk key assignment. Tap up for a
listen-only key assignment.
• If you assign any type of talk key, the assignment name will appear in the alphanumeric
display above the key.
• If you add a listen assignment to an existing talk assignment, the listen assignment will appear
briefly in the alphanumeric display to confirm the assignment. Then the talk assignment will
reappear.
• If you assign a key that is listen only, the assignment name will appear briefly in upper-case
letters, then will change to lower-case letters.
This completes the key assignment procedure. Refer to any notes below regarding the various key
assignment types.
When reassigning keys remember to remove any Chime, Solo, or Key Group options if they will
Note
not be needed for the new key assignment.

Key Assign Menu, Matrix

Matrix appears only for trunked intercom systems. You must select a remote intercom matrix
before assigning intercom keys to destinations in that matrix. You do not need to select matrix to
assign keys to destinations in your own matrix. You also do not need to select a matrix when
assigning an auto function to a key.

Key Assign Menu, Pt-to-Pt

Assigns a key that talks or listens to another intercom port. Note that some pt-to-pt destinations
may be non-keypanel devices that cannot activate talk and listen paths. Therefore, if you want full
communication, you may need to assign both talk and listen on the key.
6-4
K P - 6 3 2 U s e r M a n u a l
should now display in the Call waiting window. Press ↓↓ or −− if necessary to
should now display.