Service Menu, Disply Dim; Service Menu, Dsp Func - RTS EKP-632 User Manual

Select
1
2
Speaker
Tap PGM.
3
By default,
4
of dimming.
Press ↓↓ to increase the amount of dimming. Press −− .to decrease it.
5
Tap CLR to exit when finished.
6
The new dimming level is now set.
7
8 Run Service Menu, Save Cfg, to store the Dim setting.

Service Menu, Disply Dim

This item adjusts the alphanumeric display settings.
1. Select
2.
Disply Off
3. Press ↓↓ or −− .to select any of the following:
Displ Off
display.
: Possibly a better choice when the ambient light level is low. Uses less power and increases
Dim
display life.
Normal
Bright
Maximum
power and decreases display life.
Scr Saver
keypanel in screen saver mode. Normal display operation resumes if there is an incoming call
or if the user actuates any control.
For settings which change the operating brightness, run Service Menu, Save Cfg, page 44, to store
Note
the setting.

Service Menu, DSP Func

This item accesses the digital signal processing features.
1
Select
2
3
Filtering
Filtering
Gating
Metering
Mixing
Refer to one of the following paragraphs for further information on the item that you select.
4
6-10
K P - 6 3 2 U s e r M a n u a l
, then tap PGM.
Dim
displays. To select headset, press ↓↓ .
displays for speaker, and
-8dB
, then tap PGM.
Disply Dim
displays
: Turns off the display. Any incoming call, or control movement, will reactivate the
: Default medium brightness setting.
: Good when ambient light is bright.
: Recommended only for very bright ambient light, such as outdoors. Uses maximum
: Overrides the normal screen saver timeout period and immediately places the
, then tap PGM.
DSP Func
displays. Press ↓↓ or −− .to display any of the following items:
displays for headset. This is the default amount
0dB