Figure 2.1
ADAM CS with 50-pin Telco back panel:
Determine the address setting from Figure 2.1. To use the table, locate the intercom port number
to which the KP-632 will be connected. Then, read across to the "Address" column to find the
Address number. Set the KP-632 Address switch to this number.
Settings 0, and 9 through F are not used.
Note
2-4
K P - 6 3 2 U s e r M a n u a l
Address number vs intercom port numbers for 8-Port Audio I/O Cards (ADAM AND ADAM
CS Intercom Systems.