RTS EKP-632 User Manual page 96

5. Using the Browse feature, browse to the file to be downloaded.
6. Click Open.
The Download Device Firmware screen appears.
7. Click Begin Download.
The download begins.
8. Click OK.
The RVON-1 firmware download is complete. This takes a minute or two to occur.
WARNING! -
9. Verify the correct version is shown on the keypanel version screen.
NOTE:
18
Do NOT power down the keypanel until you have verified the new version
information from AZedit. If the card loses power while reprogramming the on-
board flash memory, the card may become unbootable and may need to have
its flash chips reprogrammed at the factory.
You can also download the RVON-1 firmware through Status>Ports. You will
not be able to check the version once the download is completed from the
Port Status screen.
RVON-1 User Manual