Tone Generator Activation (Func-Display-7); Display Requests Using Scrolling; Keypad Programming, Assigning Setup Pages - RTS EKP-632 User Manual

Tone Generator Activation (FUNC-DISPLAY-7)

FUNC DISPLAY 7
This sequence activates the keypanel's internal tone generator. You can use the tone generator to
check the audio send and receive paths to and from the matrix. For example, you can assign a talk
key on the keypanel to talk to itself. When you activate the talk key, you should be able to hear
the tone from the keypanel speaker or from a headset.
To turn off the tone generator, press the CLR key.
The microphone input is turned off when the tone generator is active.
Note

Display Requests Using Scrolling

The display requests described previously can also be accessed using scrolling. Scrolling also
offers several additional features. To use scrolling, tap FUNC DISPLAY followed by ↓↓ or
−− to scroll through the list of display requests. The display request names will appear in the
Call waiting window as follows:
PGM: Displays the calculated port number. CLR to quit.
ID
PGM: Displays level 2 talk assignments. CLR to quit.
Lev2
PGM: Displays listen assignments. CLR to quit.
Lstn
PGM: Displays crosspoints closed to this keypanel. CLR to quit.
Name
PGM: Displays level 1 talk key assignment types. CLR to quit.
Type
PGM: Displays matrix ID for all level 1 talk assignments. CLR to quit.
Mtx
PGM: Turns on tone generator. CLR to quit and turn off tone generator.
Tone
PGM: Displays setup page assignments.
Epnl
key.
X2
PGM: After selecting this item, tap up on any listen key with a point-to-point or party line
Gain
assignment. The current listen gain from this keypanel to the intercom port or party line displays
in the Call waiting window. Tap ↓↓ or − − to change the gain. CLR to quit. Use
to reset all gains.
PGM: Reset all port / party line gains to 0dB.
VRst
PGM: Displays a list of key assignments that are set up for this keypanel, but not currently
Asgn
accessible. This includes talk level 1 assignments on setup pages that are not currently assigned,
and any key assignment that might be obscured by the call-waiting window. You can scroll
through the list using the ↓↓ − − keys. Then use the Call waiting key to talk to any of the
listed destinations.
PGM: Test keys and displays. CLR to quit.
Test
: Display keypanel firmware version. CLR to quit.
Vxxx

KEYPAD PROGRAMMING, ASSIGNING SETUP PAGES

Tap the E-PNL key.
1
Select one of the four setup pages: tap 1 , or 2 , etc.
2
Tap the PGM key.
3
Tap any key in the row of keys where you want to assign the setup page.
4
=EKP-632 bottom row keys.
=KP-632 bottom row keys.
Mn
=EKP-632 top row keys.
X3
=KP-632 top row
X1
PGM
VRst
5-3