Table of Contents
Advertisement
4.6.6.c. Syslog Transmission Configuration
On the System Security Configuration Menu, pressing "G" opens the Syslog
Transmission Configuration Page screen, as shown in Fig. 4-6-13. In this
screen, you can set Syslog server information to send a system log.
PN23129K/PN23129A Local Management System
System Security Configuration -> Syslog Transmission Configuration Menu
Syslog Server List:
No.
Status
---- -----------
1
Disabled
2
Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Server [S]tatus
Set Server [F]acility
Command>
Enter the character in square brackets to select option
Screen Description
Status:
Indicates a status of Syslog Transmission.
IP Address:
Indicates an IP address of Syslog server.
Facility:
Indicates a value of Facility.
Include
Indicates information to be added.
SysName/IP:
SysName
IP Address
IP Address
Facility
---------------
----------
0.0.0.0
Facility0
0.0.0.0
Facility0
Set Server [I]P
Set S[y]sName/IP Include
Fig. 4-6-13 Syslog Transmission Configuration
Adds a SysName of this Switching Hub to a system log to
be transmitted.
Adds an IP address of this Switching Hub to a system log
to be transmitted.
58
Include SysName/IP
------------------
[Q]uit to previous menu
[C]lear Server Information
Advertisement
Table of Contents
