Panasonic Switch-M12PWR Operation Manual page 168

Available commands are listed below.
N Show the next page.
Press "N" to go to the next page.
V Show the previous page.
Press "V" to go to the previous page.
A Add/delete a MAC address of a terminal to be authorized/unauthorized for access without
authentication.
Press "A." The command prompt changes to "Add or Delete MAC address (A/D)>." Press
"A" to register a terminal to be authorized/unauthorized for access without
authentication. Press "D" to delete it. If you press "A" to register a terminal, the
command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx) >." Enter the MAC
address. Then, the command prompt changes to "Enter mask length>." Specify a mask.
Then, the command prompt changes to "Select auth status (A/U) >." To authorize the
terminal, press "A." Otherwise, press "U." Then, the command prompt changes to "Enter
port number>." Specify the port to apply. If you press "D" to delete an address, the
command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx) >." Enter the MAC
address.
M Change the mask of a registered MAC address.
Press "M." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx) >."
Enter the MAC address you wish to change. Then, the command prompt changes to
"Enter mask length>." Specify a mask.
R Search for a registered MAC address.
Press "R." The command prompt changes to "Enter MAC Address(xx:xx:xx:xx:xx:xx) >."
Enter the MAC address you wish to search for.
Q Return to the previous menu.
168