Panasonic Switch-M12PWR Operation Manual page 104

PN23129K/PN23129A Local Management System
Advanced Switch Configuration -> Multiple Spanning Tree Configuration
Global MSTP Status: Disabled
Protocol Version
MST Configuration Name
MST Revision Level
MST Config Digest
-------------------------------- <COMMAND> -----------------------------------
[E]nable/Disable Global MSTP
Set MSTP Protocol [V]ersion
Set MSTI Configuration [N]ame
Set MSTI [R]evision Level
CIST [C]onfiguration
Command>
Enter the character in square brackets to select option
Screen Description
Global MSTP Indicates the operation status of Spanning Tree.
Status:
Enabled
Disabled
Protocol Version: Indicates a version of Spanning Tree.
MSTP
RSTP
STP-Compatible Operates with IEEE802.1D compatible Spanning
MST Indicates MST region name. No MST region name is the factory
Configuration default setting.
Name:
MST Revision Indicates a revision of MST region setting. The factory default setting
Level: is 0.
MST Config Indicates a message digest of MST configuration.
Digest:
: STP-Compatible
:
: 0
: 00000000000000000000000000000000
CIST [B]asic Port Configuration
CIST [A]dvanced Port Configuration
MSTP Ins[t]ance Configuration
Designated Topology [I]nformation
Re[g]ional Topology Information
[Q]uit to previous menu
Fig. 4-7-15 STP mode
Spanning Tree is Enabled.
Spanning Tree is Disabled. (Factory default setting)
Operates with IEEE802.1s Multiple Spanning Tree
Protocol.
Operates with IEEE802.1w compatible Rapid
Spanning Tree Protocol.
Tree Protocol.
104