Panasonic Switch-M12PWR Operation Manual page 52

Screen Description
Console UI Displays the idle timeout settings (in minutes) for terminating a
Idle Time Out: console-connected session if no input is made. The factory default
setting is 5 minutes.
Telnet UI Idle Displays the idle timeout settings (in minutes) for terminating a
Time Out: Telnet-connected session if no input is made. The factory default setting
is 5 minutes.
Telnet Server: Displays the Telnet access settings. 'Enabled' is the factory default
setting.
Enabled:
Disabled:
SNMP Agent: Displays the SNMP access settings. 'Disabled' is the factory default
setting.
Enabled:
Disabled:
Web Server Displays the web access settings. 'Disabled' is the factory default setting.
Status: Enabled:
Disabled:
IP Setup Displays the access settings for the IP address configuration software,
Interface: bundled with the Panasonic network cameras. 'Enabled' is the factory
default setting.
* For instructions, refer to Appendix C.
Enabled:
Disabled:
Local User Displays the current login username. 'manager' is the factory default
Name: setting.
Syslog Displays the settings for sending system logs to the Syslog server.
Transmission: 'Disabled' is the factory default setting.
Enabled:
Disabled:
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Access is enabled.
Access is disabled.
Sends system logs to the Syslog server.
Does not send system logs to the Syslog server.
52