Create Out-Profile Action Menu - Panasonic Switch-M12PWR Operation Manual

4.7.5.h. Create Out-Profile Action Menu
On the Out-Profile Action Configuration screen, pressing "C" opens the
Create Out-Profile Action Menu, as shown in Fig. 4-7-34. On this screen, you
can create Out-Profile.
PN23129K/PN23129A Local Management System
Out-Profile Action Configuration -> Create Out-Profile Action Menu
Index
Deny/Permit
Committed Rate
Burst Size
Policed-DSCP
-------------------------------- <COMMAND> -----------------------------------
Out-Profile Action [I]ndex
Set [D]eny/Permit
Set [C]ommitted Rate
Set [B]urst Size
Command>
Enter the character in square brackets to select option
Screen Description
Index Displays the Out-Profile Index number.
Committed Rate Displays the committed rate.
(1Mbps/unit)
Burst Size(KB) Displays the traffic burst size that can be transmitted exceeding the
committed rate. Select Burst Size from 4K, 8K, 16K, 32K, and 64K.
Deny/Permit Displays deny/permit of packet.
Policed-DSCP DSCP marking status for out-profile.
:
: Permit
: 1
: 4KB
: Ignore
[A]pply
[Q]uit to previous menu
Fig. 4-7-34 Out-Profile Creation
Displays the guaranteed size of committed rate.
143
Set Policed-D[S]CP