Table of Contents
Advertisement
Available commands are listed below.
N
Display the next page.
Press "N" to change the display to the next page.
P
Display the previous page.
Press "P" to change the display to the previous page.
C
Create a new classifier.
Press "C" to change the screen to the Create Classifier Configuration Menu. For
the Create Classifier Configuration Menu, see the next section of 4.7.5.b.
D
Delete the classifier.
Press "D" to change the command prompt to "Please enter classifier index>."
Enter an index of the classifier to be deleted from 1 to 65535.
O
Modify classifier configuration.
Press "O" to change the command prompt to the Modify Classifier Menu. Set
(modify) in the same as the Create Classifier Configuration Menu.
M
Display detailed information of the classifier.
Press "M" to display the sender MAC address, receiver MAC address, 802.1p,
VLAN ID, TCP SYN flag, and ICMP type information.
S
Display further detailed classifier information.
Press "S" to display the source MAC address, destination MAC address, VLAN
ID, source IP address, destination IP address, 802.1p priority, DSCP, protocol
type, TCP/UDP source port number, TCP/UDP destination port number, TCP
SYN flag, and ICMP type information.
Q
Return to the previous menu.
128
Advertisement
Table of Contents
