Configuration Of Scheduling Method - Panasonic Switch-M12PWR Operation Manual

4.7.6.b. Configuration of Scheduling Method
On the Quality of Service Configuration Menu, pressing "C" opens the
Scheduling Method screen, as shown in Fig. 4-7-40. On this screen, you can
set a scheduling method.
PN23129K/PN23129A Local Management System
Quality of Service Configuration -> Scheduling Method
Scheduling Method: Strict
Traffic Class
-------------
0
1
2
3
4
5
6
7
-------------------------------- <COMMAND> -----------------------------------
[S]et Scheduling Method
Set Traffic Class-Weight [M]apping
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Fig. 4-7-40 Configuration of Scheduling Method
Screen Description
Scheduling Method:
Traffic Class
Weight
Available commands are listed below.
S Select the scheduling method of QoS function.
Press "S" to change the command prompt to "Select scheduling method (S/W)>." if
Strict Priority Queuing is used, press "S." If Weighted Round Robin is used, press
"W."
M Set weight to priority (Traffic Class).
Press "M" to change the command prompt to "Enter traffic class>." Enter Traffic
Class (0 to 7). Then, the command prompt changes to "Enter weight for traffic
class #>." Enter weight (1 to 127).
Q Return to the previous menu.
Weight
------
1
2
3
4
5
6
7
8
Displays the scheduling method of QoS function.
Strict SPQ: Strict priority queuing (Factory default
setting)
Weighted WRR: Weighted round robin scheduling
Round Robin
Displays the packet priority.
Displays a weight to distribute packets.
153