Rrp Domain Modification Menu - Panasonic Switch-M12PWR Operation Manual

Table of Contents

Advertisement

4.7.12.b. RRP Domain Modification Menu
On the Ring Redundant Protocol Configuration screen, pressing "M" opens
the RRP Domain Modification Menu as shown in Fig. 4-7-63. On this screen,
you can modify RRP domain settings.
PN23129K/PN23129A Local Management System
RRP Management -> RRP Domain Modification Menu
RRP Domain Name : ring
Primary Port
Secondary Port
Polling Interval : 1
Control VLAN
Data VLAN
-------------------------------- <COMMAND> -----------------------------------
Set RRP Domain [N]ame
Set [P]rimary Port
Set P[o]lling Interval
Set [C]ontrol VLAN
[A]pply
Command>
Enter the character in square brackets to select option
Fig. 4-7-63 RRP Domain Modification Menu
Screen Description
RRP Domain
Displays the domain name.
Name
RRP Node
Displays the node role.
Type
Master
Transit
Primary Port
Displays the primary port.
Secondary
Displays the secondary port.
Port
Polling
Displays the polling interval.
Interval
Fail Period
Displays the timeout for polling.
Control VLAN
Displays the control VLAN ID.
Data VLAN
Displays the data VLAN ID.
: 13
: 14
: 100
: 1
Set Node [T]ype
Set [S]econdary Port
Set [F]ail Period
Set [D]ata VLAN
[Q]uit to previous menu
Displays that the Switching Hub controls the ring operation.
Each domain has only one master node.
Displays that the Switching Hub is not a master node.
200
RRP Node Type : Transit
Fail Period : 2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn23129a

Table of Contents