Panasonic Switch-M12PWR Operation Manual page 222

Screen Description
Entry Displays the event number.
Time Displays the time when the event occurred, or the time accumulated after
boot if the clock is not set.
Event Displays the description of the event caused to the Switching Hub.
System Cold Start
Login from console
Login from telnet,
xxx.xxx.xxx.xxx
Configuration changed
Runtime code changes
Configuration file upload
Configuration file
download
(Bridge)Topology Change
Reboot: Normal
Reboot: Factory Default
Reboot: Factory Default
Except IP
Not authorized! (IP:
xxx.xxx.xxx.xxx)
SNTP first update to
yyyy/mm/dd hh:mm:ss
Found other multicast
router. Stopped querier
function.
Other multicast router is
expired. Restarted querier
function.
FAN status changed from
good to failed.
Temperature over
threshold.
Temperature under
threshold.
! Stus: xxxxxxxx IP: x Code:
x Add: xxxxxxxx
! Tsk: "xxxx" P:xxxxxxxxx
Pri: xx
xx
Port- Link-up
xx
Port- Link-down
xx
Port- Power ON
notification
xx
Port- Power OFF
notification
Indicates that this Switching Hub started.
Indicates a login from the console port.
Indicates a login via Telnet.
Indicates that the configuration was changed.
Indicates that the firmware was changed.
Indicates that the configuration file was
transferred to the TFTP server.
Indicates that the configuration file was
transferred from the TFTP server.
Displays that the spanning tree topology was
changed.
Indicates that this Switching Hub rebooted.
Indicates that this Switching Hub rebooted to
return settings to factory default.
Indicates that this Switching Hub rebooted to
return settings except the IP address to factory
default.
Indicates that an unauthorized manager accessed
by SNMP.
Indicates that time data was obtained by
accessing the SNTP server.
Indicates that the function was stopped because
another IGMP querier exists.
Indicates that the function was restarted because
another IGMP querier no longer exists.
Indicates that a fan problem occurred.
Indicates that the internal temperature exceeded
the threshold.
Indicates that the internal temperature decreased
below the threshold.
Indicates the system information when an
exception was raised.
Indicates that the port was linked up.
Indicates that the port was linked down.
Indicates that the power supply to the target
port is turned on.
Indicates that the power supply to the target
port is turned off.
222