Set Querier Configuration Menu - Panasonic Switch-M12PWR Operation Manual

4.7.10.d. Set Querier Configuration Menu
On the IGMP Snooping Configuration Menu, pressing "C" opens the Set
Querier Configuration Menu as shown in Fig. 4-7-57.
PN23129K/PN23129A Local Management System
IGMP Snooping Configuration -> Set Querier Configuration Menu
Querier Status
IGMP Version
Query Interval
Max Response Time : 10
Querier Timeout
TCN Query Count
TCN Query Interval : 10
-------------------------------- <COMMAND> -----------------------------------
Set Qu[e]rier Status
Set [M]ax Response Time
Set TCN Query I[n]terval
Command>
Enter the character in square brackets to select option
Fig. 4-7-57 IGMP Snooping Querier Configuration
Screen Description
Querier Status
Current Role
IGMP Version
Querier Interval
Max Response Time
Querier Timeout
TCN Query Count
TCN Query Pending
Count
TCN Query Interval
: Disabled Current Role: Querier
: Version 2
: 60
: 120
: 2 TCN Query Pending Count
Set IGMP [V]ersion
Set Querier [T]imeout
[Q]uit to previous menu
Displays whether IGMP Snooping Querier is enabled or
disabled.
Displays the IGMP Snooping Querier status.
Querier This Switching Hub is serving as Querier.
None Since there is another device that sends queries,
this Switching Hub has stopped sending queries.
Displays the version of IGMP queries to be sent.
Displays the query sending interval.
Displays the time to wait for a response to a query.
Displays the time before determining that there is no longer
another Querier.
Displays the number of queries sent when an STP topology
change is made.
Displays the number of pending queries to be sent when an
STP topology change is made.
Displays the interval of sending queries when an STP topology
change is made.
188
: 2
Set Query [I]nterval
Set TCN Query [C]ount