Table of Contents
Advertisement
Available commands are listed below.
R
Set a reporting interval.
Press "R." The command prompt changes to "Set report interval to
daily/weekly/monthly (D/W/M)>." Enter "D" when notifying every day, or "W"
when notifying every week, or "M" when notifying every month, respectively.
S
Set an interval to obtain samples.
Press "S." The command prompt changes to "Set sample interval (1/2/3/4/5/6)>."
Select a sampling interval you wish to set with a value of 1-6.
1
10 minutes
P
Set Enable/Disable for notification of port information.
Press "P." The command prompt changes to "Enable or Disable port information
attached in report (E/D)>." Enter "E" to enable, or "D" to disable notification.
T
Set Enable/Disable for notification of traffic information.
Press "T." The command prompt changes to "Enable or Disable traffic information
attached in report (E/D)>." Enter "E" to enable, or "D" to disable notification.
L
Set Enable/Disable for notification of system log information.
Press "L." The command prompt changes to "Enable or Disable system log attached
in report (E/D)>." Enter "E" to enable, or "D" to disable notification.
F
Set Enable/Disable file attachment.
Press "F." The command prompt changes to "Enable or Disable attached file in
report (E/D)>." Enter "E" to enable, or "D" to disable notification.
Y
Set a type of attached file.
Press "Y." The command prompt changes to "Set attached file type to csv/txt
(C/T)>." Enter "C" to be CSV format, or "T" to be text format.
A
Set a port for the report.
Press "A." The command prompt changes to "Enter port numbers (up to 14 ports)>."
Enter a port number you wish to set with a value of 1-14.
D
Release a port for the report.
Press "D." The command prompt changes to "Enter port numbers (up to 14
ports)>." Enter a port number you wish to release setting with a value of 1-14.
U
Set a notification of utilization rate.
Press "U." The command prompt changes to "Attach or Detach utilization in report
(A/D)>." Enter "A" to notify, or "D" not to notify utilization rate.
O
Set a notification of the number of total frames.
Press "O." The command prompt changes to "Attach or Detach total frames in
report (A/D)>." Enter "A" to notify, or "D" not to notify the number of total frames.
B
Set a notification of the number of broadcasts.
Press "P." The command prompt changes to "Attach or Detach broadcasts in report
(A/D)>." Enter "A" to notify, or "D" not to notify the number of broadcasts.
M Set a notification of the number of multicasts.
Press "P." The command prompt changes to "Attach or Detach multicasts in report
(A/D)>." Enter "A" to notify, or "D" not to notify the number of multicasts.
C
Set a notification of the number of collisions.
Press "P." The command prompt changes to "Attach or Detach collisions in report
(A/D)>." Enter "A" to notify, or "D" not to notify the number of collisions.
E
Set a notification of the number of errors.
Press "P." The command prompt changes to "Attach or Detach total errors in report
(A/D)>." Enter "A" to notify, or "D" not to notify the number of errors.
Q
Return to the previous menu.
2 30 minutes
3
1 hour
64
4
3 hours
5
6 hours
6
1 day
Advertisement
Table of Contents
