Table of Contents
Advertisement
On the login screen, similar to Fig. 4-2-1 or Fig. 4-2-2, enter the login name.
The Switching Hub's default login name is set to "manager." Enter
"manager" and press the Return key. Then, you need to enter a password,
as Fig. 4-2-3 displays. The Switching Hub's default password is the same as
the login name ("manager"). Enter the password correctly and press the
Return key.
=============================================================================
PN23129K/PN23129A Local Management System Version 2.0.0.xx
MAC Address: 00:C0:8F:xx:xx:xx
==============================================================================
Login Menu
Login: manager
Password: *******
Both the login name and password can be changed. For the detailed
change procedure, refer to 4.6.6.
Note: Up to four users can access the Switching Hub concurrently via Telnet.
Fig. 4-2-3 Entering password
26
Advertisement
Table of Contents
