Snmp Management Configuration - Panasonic Switch-M12PWR Operation Manual

4.6.3.a

SNMP Management Configuration

On the SNMP Configuration Menu, pressing "M" opens the SNMP
Management Configuration Menu, as shown in Fig. 4-6-5. On this screen,
you can configure the SNMP manager settings.
PN23129K/PN23129A Local Management System
SNMP Configuration -> SNMP Management Configuration Menu
SNMP Manager List:
No. Status
---- --------
1 Enabled
2 Enabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
-------------------------------- <COMMAND> -----------------------------------
Set Manager [S]tatus
Set Manager P[r]ivilege
Command>
Enter the character in square brackets to select option
Fig. 4-6-5 SNMP Management Configuration
Screen Description
SNMP Displays the current SNMP manager settings.
Manager List:
No.
Status
Privilege
IP Address
Community
Privilege IP Address
----------- ---------------
Read-Write 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Read-Only 0.0.0.0
Set Manager [I]P
Set Manager [C]ommunity
Displays the entry number on the SNMP Manager List.
Displays the SNMP manager status.
Enabled The SNMP manager is enabled.
Disabled The SNMP manager is disabled.
Displays the access privilege of the SNMP manager.
Read-Writ Both the read and write operations are
e allowed.
Read-Only Only the read operation is allowed.
Displays the IP address of the SNMP manager.
Displays the current community name.
39
Community
----------------------------
private
public
[Q]uit to previous menu