Panasonic Switch-M12PWR Operation Manual page 46

Table of Contents

Advertisement

Screen Description
Port
Displays the port number.
Trunk
Displays the group number for a trunked port.
Type
Displays the port type.
100TX
1000T
1000X
Admin
Displays the current port status. For all ports, 'Enabled' is the factory default
setting.
Enabled
Disabled
Link
Displays the current link status.
Up
Down
Mode
Displays the communication speed and full-duplex/half-duplex settings. For
all ports, 'Auto' is the factory default setting.
Auto
100-FDx(100F)
100-HDx(100H)
10-FDx(10F)
10-HDx(10H)
Flow Ctrl
Displays the flow control settings. For all ports, 'Disabled' is the factory
default setting.
Enabled
Disabled
Auto-MDI
Displays the Auto MDI function settings. For ports 1 to 12, 'Disabled' is the
factory default setting. (The settings for Ports 13 and 14 are fixed at
"Enabled.")
Enabled
Disabled
The port type is 10/100BASE-TX.
The port type is 10/100/1000BASE-T.
The port type is SFP port.
The port is available.
The port is not available.
A link has been established successfully.
A link has not been established.
Auto negotiation mode
100 Mbps full-duplex
100 Mbps half-duplex
10 Mbps full-duplex
10 Mbps half-duplex
The flow control is enabled.
The flow control is disabled.
The Auto-MDI function is enabled.
The Auto-MDI function is disabled.
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pn23129a

Table of Contents