Table of Contents
Advertisement
4.7.9.b. MAC Based Access Control Configuration
On the 802.1x Port Base Access Control Configuration screen, pressing "M"
changes the command prompt to "Select the Port based or MAC based auth
mode (P/M) >." Pressing "M" opens the MAC Based Access Control
Configuration Menu as shown in Fig. 4-7-45. On this screen, you can
configure the MAC-based access control. The supported authentication
methods are EAP-MD5, TLS, and PEAP.
PN23129K/PN23129A Local Management System
Advanced Switch Configuration -> MAC Based Access Control Configuration Menu
NAS ID: Nas1
Operational Control Direction: Both
Transmit Period: 30
Quiet Period
Force Auth MAC Timeout: 3600 sec
Supplicant MAC Addr Type
------------------- ------- ------------------ ------------ --------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
Pre[v]ious Page
[P]ort No
Port Auth [M]ode
Port [C]ontrol
Port Ctrl [D]irection
Num[b]er of Supplicant
De[f]ault VLAN ID
Command>
Enter the character in square brackets to select option
Fig. 4-7-45 MAC Based Access Control Configuration
Screen Description
NAS ID
Displays the access ID (NAS Identifier).
Port No
Displays the port number.
Number of
Displays the number of supplicants that can be authenticated by the
Supplicant
port. The factory default setting is 512.
Operational
Displays the operation status of controlled direction by IEEE 802.1X
Control
function.
Direction
Both
In
Administrative
Displays the administrative status of controlled direction by IEEE 802.1X
Control
function.
Direction
Both
In
Port No: 1
Administrative Control Direction: Both
sec Max Request : 2
: 60
sec Serv Timeout: 30
Per Port Re-auth: Disabled
MAC Control
[T]ransmission Period
Q[u]iet Period
Ma[x]imum Request
Server Time[o]ut
Supp[l]icant Timeout
Gue[s]t Access Mode
[G]uest VLAN ID
D[y]namic VLAN Status
Unless the client is authenticated, this Switching Hub does not
send or receive packets from the port.
Unless the client is authenticated, this Switching Hub does not
receive packets from the port.
Unless the client is authenticated, this Switching Hub does not
send or receive packets from the port.
Unless the client is authenticated, this Switching Hub does not
receive packets from the port.
163
Number of Supplicant: 512
Supplicant Timeout: 30
sec Re-auth Period: 3600 sec
Auth Status Re-auth
R[e]-auth Period
Re-[a]uth Status
Initiali[z]e
[R]e-auth Initialize
Delete Aut[h] MAC
Force Auth MAC T[i]meout
[Q]uit to previous menu
sec
Advertisement
Table of Contents
