F97 Selection Of Copy Function - SMC Networks ISE20B Operation Manual

■[F97] Selection of copy function
The set values of pressure and functions (except for corrected value of fine adjustment of display value and
line name) can be copied. When the pressure range, output and unit specifications are the same, this
function becomes available. The set value can be copied to up to 10 pressure switches simultaneously.
<Connection>
Connect the pressure switches with the power supply turned off.
Connect the FUNC terminals of the copy source Pressure switch and the copy destination Pressure
switches, and then turn on the power supply.
The copy source pressure switch is the switch from which the setting is to be copied.
The copy destination Pressure switch is the switch to which the setting is to be copied.
When the output specifications of the copy destination pressure switch are R, S, T or V, they should be set
to copy input in accordance with the [F 5] FUNC terminal setting (page 47) beforehand.
<Operation>
Press the or
Selection of copy function
Press the or
[oFF] (not use) is selected
Press the
Return to function selection
mode.
button of the copy source Pressure switch in function selection mode to display [F97].
Press the button.
button to select copy function.
button to set.
Move on to selection of copy function.
[on] (use)
[onL] (use) is selected
Press the
Move to copy ready status.
-64-
button to set.
No.PS※※-OMU0006-F