F90 Setting Of All Functions - SMC Networks ZK2-ZS L A Series Operation Manual

■[F90] Setting of all functions
All functions can be set, one after the other.
<Operation>
Press the or button in function selection mode to display [F90].
Setting of All functions
Press the or
[oFF] (unused)
selected.
Press the button
to set.
Return to function
selection mode.
1: Setting of functions
Every time the button is pressed, the function steps in the order of "Order of function of setting" on page 61.
Set by using the or
For details of how to set each function, refer to the relevant setting of function section in this manual.
Press the button.
button to select all functions.
After the change to [oFF] (unused),
press the button to set.
Return to function selection mode.
[F90] Setting of all functions completed.
buttons.
Move on to setting of all functions.
1: Setting of each function.
-60-
[[on] (used) selected.
Press the
button for 2
seconds or longer.
Measurement mode.
Doc. No. DOC1051887