F90 Setting Of All Functions - SMC Networks ZL6 Series Operation Manual
Digital pressure switch for energy-saving control ejector
Hide thumbs
Also See for ZL6 Series:
- Operation manual (31 pages) ,
- Original instructions (2 pages) ,
- Instruction manual (2 pages)
Table of Contents
Advertisement
■[F90] Setting of all functions
All functions can be set, one after the other.
<Operation>
Press the
or
button in function selection mode to display [F90].
Setting of all functions
Press the
or
[oFF] (unused)
selected.
Press the
button
to set.
Return to function
selection mode.
1: Setting of functions
Every time the
button is pressed, the function steps in the order of "Order of function of setting" on page 36
Set by using the
or
For details of how to set each function, refer to the relevant setting of function section in this manual.
Press the
button.
button to select all functions.
After the change to [oFF] (unused),
press the
button to set.
Return to function selection mode.
[F90] Setting of all functions completed.
buttons.
Move on to setting of all functions.
1: Setting of each function.
Measurement mode.
-35-
[[on] (used) selected.
Press the
button for 2
seconds or longer.
NO.ZL3-OM00701-A
Advertisement
Table of Contents
