Table of Contents
Advertisement
■[F 3] Digital filter setting
The Digital filter can be selected to filter the pressure measurement.
Output chattering or flicker in the measurement mode display can be reduced by setting the digital filter.
<Operation>
Press the
or
Digital filter setting
Press the
or
Press the
1: Each set value is a guideline for 90% response time.
2: Both the switch output and pressure display are affected. When only switch output needs to be affected, select the delay
time setting (page
23
and 29).
button in function selection mode to display [F 3].
Press the
button.
button to select the digital filter.
button to set.
[F 3] Digital filter setting completed
-31-
Move on to digital filter setting.
Return to function selection mode.
No.PS※※-OMS0007-D
Advertisement
Table of Contents
