F 3 Digital Filter Setting - SMC Networks ISE79S L2 Series Operation Manual

■[F 3] Digital filter setting
The Digital filter can be selected to filter the pressure measurement.
Output chattering or flicker in the measurement mode display can be reduced by setting the digital filter.
Digital filter can be set in 0.01[sec.] increment in the range of 0.00 to 30.00 sec.
<Operation>
Press the UP or DOWN button in function selection mode to display [F 3].
Digital filter setting
Press the UP or Down button to change the digital filter set time.
Press the SET button to set.
1: Each set value is a guideline for 90% response time.
2: Both the switch output and pressure display are affected. When only switch output needs to be affected, select the delay time
setting. (page 24, 31 and 34)
Press the SET button.
[F 3] Digital filter setting completed
-35-
Move on to digital filter setting.
Return to function selection mode.
No.PS※※-OMY0007-B