Maintaining The Ex9200 Line Cards; Handling And Storing Line Cards - Juniper EX9214 Hardware Manual

FPGA Revision
PMBus Expected
device voltage
XF ASIC A 1000 mV
XF ASIC B 1000 mV
The output is of an EX9208 switch. The output is similar for all EX9200 switches.
For more information about using the CLI, see the Junos OS documentation.

Maintaining the EX9200 Line Cards

IN THIS SECTION

Handling and Storing Line Cards | 246

Maintaining Line Card Cables | 250
Unpacking a Line Card Used in an EX9200 Switch | 250
Removing a Line Card from an EX9200 Switch | 251
Installing a Line Card in an EX9200 Switch | 254
Removing a MIC from an EX9200-MPC Line Card | 256
Installing a MIC in an EX9200-MPC Line Card | 260
Handling and Storing Line Cards
IN THIS SECTION
Holding a Line Card | 247
Storing a Line Card | 249
13
Measured Measured Calculated
voltage current power
997 mV 13609 mA 13568 mW
1000 mV 12484 mA 12484 mW
246