Ex9214 Chassis - Juniper EX9214 Hardware Manual

Table 6: FRUs in an EX9200 Switch
FRU
SFP, SFP+, QSFP+, and CFP transceivers
Pluggable Transceivers Supported on
See
EX9200 Switches
for the Junos OS release in
which the transceivers were introduced.
NOTE: Line cards are not part of the base or redundant configuration. You must order them
separately.
NOTE: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of
hardware components at
Failure to do so can result in significant delays if you need replacement parts. This note does not
apply if you replace existing components with the same type of component.

EX9214 Chassis

IN THIS SECTION
Understanding EX9214 Switch Component and Functionality Redundancy | 28
Craft Interface in an EX9200 Switch | 29
Midplane in an EX9200 Switch | 36
Cable Management Bracket in an EX9214 Switch | 39
(Continued)
Type
Hot-insertable and hot-removable.
https:/ /www.juniper.net/customers/support/tools/updateinstallbase/
27
.