Modular Interface Card Led In An Ex9200 Switch - Juniper EX9214 Hardware Manual

Table 41: Network Port LEDs on Line Cards in an EX9200 Switch—Status LED
LED

Modular Interface Card LED in an EX9200 Switch

The Modular Interface Cards (MICs) in the following line cards for EX9200 switches have an LED labeled
OK/FAIL on the faceplate that indicates the online status information of MICs.
EX9200-4QS Line Card
•
EX9200-MPC Line Card
•
• EX9200-40F Line Card
EX9200-40F-M Line Card
•
EX9200-40T Line Card
•
Table 42 on page 111 describes the MIC LED on line cards for EX9200 switches, its colors and state,
and the status it indicates.
Table 42: MIC LED for EX9200 Switches
LED Color
OK/FAIL Green
Unlit
Red
LCD Indicator
LED: DPX
State and Description
On steadily—The MIC is functioning normally.
The MIC is not online.
On steadily—The MIC has failed.
State, Color, and Description
Indicates the duplex mode. The status indicators are:
•
Green—Port is set to full-duplex mode.
•
Unlit—Port is not set to full-duplex mode.
(Continued)
111