Installing A Mic In An Ex9200-Mpc Line Card - Juniper EX9214 Hardware Manual

Figure 81: Removing an EX9200-40T-MIC

Installing a MIC in an EX9200-MPC Line Card

Before you begin installing a MIC in an EX9200-MPC line card:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
Prevention of Electrostatic Discharge Damage
damage (see
• Ensure that you know how to handle and store the line card (see
Ensure that you have the following parts and tools available:
• (If you will install only one EX9200-10XS-MIC or EX9200-20F-MIC) A septum and screws to secure
the septum
).
Handling and Storing Line Cards
260
).