Rj-45 Management Port Connector Pinout Information - Juniper EX9214 Hardware Manual

• USB 2.0 or later.
• Formatted with a FAT or MS-DOS file system.
• If the switch is running Junos OS Release 9.5 or earlier, the formatting method must use a primary
boot record. Microsoft Windows formatting, by default, does not use a primary boot record. See the
documentation for your USB flash drive for information about how your USB flash drive is formatted.

RJ-45 Management Port Connector Pinout Information

Table 53 on page 145 provides the pinout information for the RJ-45 connector for the management port
on Juniper Networks devices.
Table 53: RJ-45 Management Port Connector Pinout Information
Pin
1
2
3
4
5
6
7
8
Signal
TRP1+
TRP1-
TRP2+
TRP3+
TRP3-
TRP2-
TRP4+
TRP4-
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
145