Removing An Sf Module From An Ex9200 Switch - Juniper EX9214 Hardware Manual

2. Verify that the fabric planes come online correctly by issuing the show chassis fabric summary command:
user@switch> show chassis fabric summary
Plane State Uptime
0 Online 2 days, 19 hours, 10 minutes, 9 seconds
1 Online 2 days, 19 hours, 10 minutes, 9 seconds
...
3. Verify that the backup Routing Engine is back online by issuing the show chassis routing-engine 1
command:
user@switch> show chassis routing-engine 1
Routing Engine Status:
Slot 1:
Current State
...
4. Verify that the EX9200-SF3s appear in output from the show chassis hardware command:
user@switch> show chassis hardware
Hardware inventory:
Item Version Part number Serial number
Chassis
Midplane REV 01
FPM Board REV 04
PEM 0 Rev 10
PEM 1 Rev 10
Routing Engine 0 REV 02
Routing Engine 1 REV 02
CB 0 REV 08
CB 1 REV 10
...

Removing an SF Module from an EX9200 Switch

Before you begin to remove an SF module:
• Ensure you understand how to prevent electrostatic discharge (ESD) damage. See
Electrostatic Discharge Damage
Backup
JN1221A03RFC
750-053633 ACRA1451
760-021392 ABCB4822
740-029970 QCS1251U020
740-029970 QCS1251U028
740-049603 9009153805
740-049603 9009153993
750-048307 CABC6474
750-048307 CABH8948
.
Description
EX9204
EX9204-BP
Front Panel Display
PS 1.4-2.52kW; 90-264V AC in
PS 1.4-2.52kW; 90-264V AC in
RE-S-EX9200-1800X4
RE-S-EX9200-1800X4
EX9200-SF3
EX9200-SF3
Prevention of
236